SPECIFICATIONS

Model Number: WF96TH
Voltage: AC 220V
Control Temperature Range: -40℃~ 85℃
Working Environment: -10℃~ 50℃
Support APP: Tuya Smart
Wireless Standard: WiFi 2.4GHz B/G/N
Function 1: Temperature Real-Time Supervision
Function 2: Humidity Real-Time Supervision
Function 3: Start/Stop Heating/Cooling Equipment
Function 4: Timer Relay Switch
Function 5: Lower Higher Temperature Alarm
Function 6: Remote Control ON/OFF
Control Humidity Range: 0-99.9%
Temperature Error: ±1℃
Humidity Error: ±3%
Mechnism Life: Over 100000 Times
Temperature Ratio: 0.1℃
Humidity Ratio: 0.1%
Brand Name: EARUELETRIC
Usage: Industrial
Is Smart Device: YES
Cable Length: 2m
Origin: Mainland China
Choice: yes

Descriptions

• WF96HT- Digital Display Temperature And Humidity Controller，Temperature Detection, Heating Or Cooling Control, High Or Low Temperature Alarms Can Be Realized Through APP Or Instrument Buttons.
  
• The Product Is Suitable For Various Commercial And Industrial Occasions.Such As Heating System，Hot Water System，Boiler, Breeding, Hatching，And Cooling Control Of Intelligent Electromechanical Equipment.
  

Functions

Remote Switch Control, Real-Time Temperature Feedback.

Can Run Independently Wthout WiFi，Stand-Alone Temperature Control.

The Thermostat Can Be Turned On Or Off Manually No Matter Where You Are.

Dual output, temperature control and humidity control, automatic selection of high on and low off or Low On And High Off According To The Set Parameters.

Account Sharing Function.

Parameter Setting
*Long Press The"Start "Button To Enter The Start Temperature Parameter Setting，DisplayThe Start Temperature Value And Flashing. Press The"Start"Or"Stop"Button To Adjust The Value（Long Press To Quickly Add And Subtract）If There Is No Operation After Setting, It Will Automatically Return To The Operation Page After Three Seconds.

*Long Press The"Stop "Button To Enter The Stop Temperature Parameter Setting，Display The Stop Temperature Value And Flashing.Press The"Start"Or"Stop"Button To Adjust The Value（Long Press To Qquickly Add And Subtract）If There Is No Operation After Setting, It Will Automatically Return To The Operation Page After Three Seconds.

Manual Temperature Control

Manually Open：When The Temperature Control Has No Output, The Stop Temperature Is Not Reached,Press "Stop"Button,Manually Turn On Temperature Control Output,Once The Stop Temperature Is Reached, The Relay Will Open.

Manually Close:When The Temperature Control Is Outputing, But The Stop Temperature Is Not Reached,Press "Start"Button,Manually Turn Off Temperature Control Output,Once The Start Temperature Is Reached, The Relay Will The Relay Will Close.

Note:

Output 1-The Left Button Is Manual Switch

Output 2-The Right Button Is Manual Switch
Under Output 2 Is In The High-On Low-On Working Mode , The Manual Switch Is Invalid
WiFi Connection

*If The Product Has Been Added To The App，When You Need To Reconfigure,Keep Pressing The Ttrt Button Before Powering On, And Then Power On Again,Release The Button Until The Indicator Light1And 2 Are Flashes On The Screen,Entered The WiFi Configuration Mode This Time.

Note: After The User Set The Controller On APP, The Device Itself Will Keep The Record, Even The WiFi Is Disconnected, The Device Can Also Keep Working According To Its Memory.